Steve's Homepage - Print Page

Steve's Homepage
http://www.steves-homepage.co.uk/cgi-bin/yabb/YaBB.cgi
Upload area >> Receiver patches & firmware >> New to TM1500ci+. This file may help you
http://www.steves-homepage.co.uk/cgi-bin/yabb/YaBB.cgi?num=1168753685

Message started by bigglesk on Jan 14^th, 2007, 5:48am

Title: New to TM1500ci+. This file may help you
Post by bigglesk on Jan 14^th, 2007, 5:48am

For “satis” and perhaps others

This file is for those that have just purchased or are new to the TM1500ci+ rxr. It will set-up all current TP’s (Transponders) it will also install a favourites list including just about all that is available for our hobby. Primarily, it is just TP’s/ channels and favourites list. You will still have to install the latest patch/files to get these channels.

Before you install this file, I strongly recommend that you leave your dish on 1W as that is what I did when I tried it out. I deleted all channels and TP’s (everything!), installed this file and I had it all back.

For those more experienced, I suggest that you make a copy of your present TP’s/chan/fav list before you try mine.

At least this should be helpful to some, and interesting to others. Just a bit of fun for all!! 8-) 8-)

You will need the latest TM Loader_187 to do this, also your PC/laptop has to be connected directly to the rs232 on the rear of your rxr with a “Null modem cable” (Not a serial cable). To transfer this file; you do not need to turn off the power. The cable I use is female at both ends. This depends on your PC connection.

@sati Hope you sort the above out ok

bigglesk

Title: Re: New to TM1500ci+. This file may help you
Post by Mumus on Feb 12^th, 2007, 11:29pm

Very interesting information. Thank you! ;)